Skip to content
Free parade planning tool

Parade staging calculator

Find out how many feet of street you need to line up your parade, how many staging lanes you'll fill, and how long it takes to pass the grandstand. Free, no sign-up, nothing saved.

Your parade entries

The example is a mid-size parade. Change any number; results update as you type. Lengths are typical figures, so change them to yours.

Floats with a tow vehicle
Cars, trucks and convertibles
Marching bands
Walking groups
Other units
Your street and pace

Your parade

Street you need to stage it
2,855 ft0.54 mi, 60 units
Staging lanes filled
About 4at 900 ft each
Time to pass the grandstand
26 minfirst unit to last, at one spot
Step-off to last unit finishing
51 minincluding the walk down the route
Parade length on the move
5,481 ft1.04 mi, gaps included
Marshals to start with
5one per 12 units

Runs in your browser. Nothing you type is sent or saved.

The math

How the numbers are figured

How each result is figured
ResultHow it's figured
Street you need to stage itEvery unit's staging length added together, plus the gap you keep between units (15 feet to start). The gap isn't counted after the last unit.
Staging lanes filledUnits go into lanes in the order listed. A unit that won't fit in the room left in a lane starts the next one, the way it works on the street.
Time to pass the grandstandEach unit's parade length divided by walking pace (3.5 feet per second to start), plus the gap between units on the route (17 seconds to start).
Step-off to last unit finishingThe time to pass one spot, plus the time the last unit needs to walk the whole route.
Parade length on the moveEvery unit's parade length, plus the road the gaps take up at walking pace.
Marshals to start withOne marshal for every 12 units, rounded up. Add more at turns, crossings and the grandstand.

The starting lengths are typical figures, not measurements. A float can run 40 feet or 90 depending on the trailer and the tow vehicle. Ask every entry for its real length when they register, then use those numbers.

Two lengths, one entry

What is dual-length parade staging?

Every parade entry takes up two lengths of street. Staging length is the room it needs standing still in the lineup area. Parade length is the road it covers once it's moving. A walking group packs into a short stretch while it waits and spreads out once it marches. A float needs room to swing out of its lane. Plan the lineup with one number and the route with the other, and parade morning stops surprising you.

Read the full answer on dual-length parade staging

Where Karsenics comes in

This calculator gives you totals. Karsenics checks every entry.

In Karsenics, each parade registration carries its own staging length and parade length. The lineup board won't put an entry in a lane that can't hold it, and tells you how much room is left. The route simulation uses the same pace and gap settings you see here. It's free to your organization; participants pay a per-registration fee at checkout.